Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have assigned role to different users.i need to know who have been logged into the system.I know in windows i can see from the logs generated.Is this possible in 5.x ?regards,vishwesh
hi,I am trying to configure SRST with VM.VM server is located at remote location.During the WAN fails, SRST workd fine.But i need to provide VM for SRST phones.I have PSTN coneectivity to Remote location.Can anyone help me how does this works.reagrds...
I am running CME and have some remote phones which are registered to it.WAN is connected through 1.5 MB , with PPP encapsulation.Whne i try to call the across the phone rings i pick up the handset , few seconds i can hear porperly. Afterward there is...
Hi, The kind of redundacny for voice mail you are looking is not the best solution.If you need the voice mail system wotking in SRST/failover mode with the access to all you voice mail messages , i suggest you to continue to provide voicemail from th...
Hi,In CCM 6.x you can enforce user to change the password and PIN after 1st attempt.under user management>serach for the user>next to password you can find edit credential and edit the credentials as per your requrinments.If you want enforce all the ...
hi Rohan,You need to do the follwoing:1) if you are using IP Phone service , then you need to modify the ip address on the CCM IP Phone service.2) If you are using CAD , then uninstall and install the agent application, while you do installation it w...
Hi,Seems that the EM configuration is missing.Here is the link to configure EM in CME.http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemobl.html#wp1141004If you are using SIP image on 7941 then EM will not be supported...
