11-22-2011 12:25 AM - edited 03-17-2019 10:37 PM
Hi All
Can some one help me to setup FXS WIC card with Call manager 8.5 and also used for SRST mode.
Head office :
2911 router, ISDN WIC card, FXS wic card and CUCM 8.5
Remote Site
2911 router , ISDN WIC Card , FXS WIC card , no call manager , enabled SRST mode.
I want to use FXS card in Remote site to send fax from remote site users. If remote site is changed to SRST mode then all fax calls should goes through local ISDN in same router.
I know if i use VG202 all works fine however here i want to use FXS card from the router itself.
Your earliest response would be appreciated.
Regards
SS
11-22-2011 01:43 PM
You have two options:
11-23-2011 12:46 AM
HI Jonathan
I am using first option, I have created pots for the FXS port and also assigned DN number. I used my analog phone to try outbound call from the ports. it gives the dial tome but not able to make any calls.
Also i have already verified DP, CSS etc.
Please advise if you have any other idea.
Regards
SS
11-23-2011 01:16 AM
Hi
Also i want to use FXS card from the SRST router, Please help me on this, do i need to do any configuration from router side. i have added the pots from CUCM but still i am not able to make any outgoing calls.
Regards
Selva
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide