H320 to H323 gateway

[deanyoung]

I have to set up a video conference environment with a VCON MXM system that acts as the gatekeeper and a Cisco 2811 that will act as the gateway.

The 2811 will have 4 x ISDN BRI interfaces connected to the PSTN.

Can anyone help me with a configuration example on this as the Cisco 2811 will need to do the H.320 to H.323 conversion.

[thomas.chen]

This URL should help you:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_programming_reference_guide09186a0080153efb.html

[rschwendeman]

did you get your problem solved, I am having the same issue with a 2821 with 3 bri's connected.

[deanyoung]

Yes, I am installing the IP/VC 3521 H.320-H.323 Videoconf. Gateway-4 BRI device that will handle the H320 to H323 conversion. The Cisco 2821 cannot do the conversion.

Regards

[gerard van rij]

Hi all,

currently I'm also looking at this problem, should the IP/VC 3521 H.320-H.323 Videoconf. Gateway-4 BRI run next to the 2811?

we currently have 2 times isdn 30 to the outsite world connected to our 2811, does this mean that I will need extra lines for the 3521?

please let me know!

gerard

[gerard van rij]

it seems that the newest version of IOS 12.4(9)t will support h320!

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124t/124t2/vclftr4t.htm

I'll test it asap!

regards,

Gerard