While not an officially supported solution, and you'll have to revert back to the original, unextended, cables for any support if you start having problems, yes, you can extend the cables with a normal Cat6 cable and an HDMI extension cable. You may find though that there is too much voltage drop to power the camera for longer distances. If this is the case for your installation, you will need to use an external power supply for the camera. It's also recommended if using an external power supply that you don't connect the power conductors in the control cable.
See this thread for some examples of other people who have extended the HDMI and control cables.
Please remember to rate responses and to mark your question as answered if appropriate.
Wayne -- Please remember to rate responses and to mark your question as answered if appropriate.
Today, Cisco announced new advances for meetings. A couple of insights:
1. Scheduling meetings is even easier
2. New video devices
3. New headsets
Click here to learn more about these exciting advances in Cisco meeting technolog...
How does the phone registered in CUCM environment?
-The phone will obtains power via PoE or AC adapter.-The phone will loads its locally stored firmware image.-The phone learns the voice vlan id via cdp from the switch.-Via...
To participate in this event, please use the button to ask your questions
This topic is a chance to discuss more about the concepts, best deployment practices and troubleshooting tips for Webex Hybrid services. Ask qu...