09-16-2019 01:35 AM
Hello,
A VC system receive a call during a few seconds without ever accept it and the call is disconnected (see the file attached).
In the opposite, this specific system can call anyone.
So, we think the signalling flows aren't opened in only one direction.
But someone has ever had this problem before?
Kind regards.
Solved! Go to Solution.
09-16-2019 10:30 PM
As you have written, it very much sounds like you have the firewalls configured to allow the traffic to flow properly in one direction, but they aren't necessarily configured in the other direction (or on the other end).
Please remember to mark helpful responses and to set your question as answered if appropriate.
09-16-2019 10:30 PM
As you have written, it very much sounds like you have the firewalls configured to allow the traffic to flow properly in one direction, but they aren't necessarily configured in the other direction (or on the other end).
Please remember to mark helpful responses and to set your question as answered if appropriate.
10-03-2019 08:51 AM
Hello,
Exactly, the H323 static (5555 - 6555) and also dynamic port allocation range were blocked.
So we have opened this specific port range in order to fix this issue.
Kind regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide