09-20-2010 03:09 PM - edited 03-19-2019 01:37 AM
I'm migrating a customer from CUCM 4.x to 8.x and from Unity Connection 4.x to 8.x. I have found the CUCM-USR-LIC top level SKU and the MIG-CUCM-USR SKU under that. What I'm having trouble finding (or understanding) is the SKU for the Unity upgrade option. Can someone please help?
Thanks,
Steve
09-20-2010 03:44 PM
UNITYCN8-VUP-K9 for Uconn
Thanks
Srini
02-15-2011 01:29 PM
The SKU provided in the reply (i.e. UNITYCN8-VUP-K9) does not reflect the $3 per user charge. What is the $3/user SKU?
02-15-2011 01:33 PM
Sure it does, see attached screen shot
Srini
01-18-2012 06:46 AM
Does it apply to Unity 2.x upgarding to Unity Cnx 8.x?
01-18-2012 07:18 AM
Correct
Thanks
Srini
02-21-2012 03:40 AM
Hi Srini,
I can see the 3x3 upgrade, however it doesnt have the option for VM - Basic, I need to get the 3x3 upgrade for SMBE 6K.
If i use this VM licence, the impact will be higher UCSS. compare to UCSS of VM-Basic under CMBE6K.
Thanks
02-21-2012 07:14 AM
I believe these 2 threads will help. To use 3x3 you have to go to advanced VM
https://communities.cisco.com/message/65631
https://communities.cisco.com/message/67362
They might be talking about BE 5k but I believe the same logic applies
Srini
02-21-2012 07:30 AM
Hi Srini,
This is bit confusing, cause i managed to build configuration with Cisco Dynamic Configuration tools on CMBE5K using 3x3 upgrade to basic VM.
TOP-Level part: UNIFIED-CMBE5K.
also based on the ordering guide, top of page 18. we can see there is an option to upgrade to VM-Basic
Thanks
Hendro
02-21-2012 07:53 AM
So here is the new OG
Either way if your intent is 6K then there is no concept of basic VM anymore, you get all the features within 6K. If you are talking about 5K I do see the 5K basic option. I think a while back it didn't have it but now it does
Srini
02-21-2012 10:31 AM
Thanks Srini, i just realised that no VM-basic option for SMBE6K
07-20-2012 08:09 AM
I'm aware that the 3 X 3 promotion no longer exists and we presently have the 9X3 promotion. I'm presently in the process of doing an order for a CUCM upgrade and an upgrade from Unity 4.x to Unity Connection 8.X. For Untiy-->Unity Connection I've found the top level SKU ", but there is no sub SKU for UCSS. My understanding is that you would have to order 3 years of UCSS for any upgrade through the 9X2 promotion. Is there another specific SKU for this? Can someone share some light on this.
Much Thanx
07-20-2012 08:16 AM
UCSS shows up as a sub option when you select that SKU. under the 9 dollar program you will see ESW and UCSS
Thanks
Srini
07-20-2012 08:18 AM
Just seen that after sending the post. Thanks anyway for your speedy response.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide