10-19-2012 12:42 PM - edited 03-19-2019 05:45 AM
I have heard from some that for 3rd party servers, Cisco only supports HPs that are blade chassis. From the Cisco Wiki, it states that blade OR rack mounted work. Who is right?
A third of the way down in this link it states both would be sufficient as long as it contains the supported hardware (CPU, RAM, etc).
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#.22Can_I_use_this_server.3F.22
Solved! Go to Solution.
10-19-2012 01:11 PM
Hi Eric,
Rack mount or Blade servers from HP are both supported
any HP server or IBM server is supported as long as:
From your link as well.
Cheers!
Rob
"And if I should fall behind
Wait for me" - Springsteen
10-19-2012 01:11 PM
Hi Eric,
Rack mount or Blade servers from HP are both supported
any HP server or IBM server is supported as long as:
From your link as well.
Cheers!
Rob
"And if I should fall behind
Wait for me" - Springsteen
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide