09-25-2012 02:29 AM
I have CUCMBE 6000 and one 2901 Gateway RUnning in Head Quaters.
There is a Branch office which has only one IP Phone. Its is 9971.
9971 has buit in VPN Client and 2901 in HQ will be the VPN server and also Voice Gateway.
Branch office has a PSTN line. But they have no router or gateway in Branch office.
Even when the 9971 Phone is registered with CUCMBE in HQ through inbuilt VPN Client ,
Only Calls to Internal HQ extensions should be gone thorugh the VPN from Branch and all other
calls should be diverted to Brach office PSTN line itself from 9971 in Branch.
Anyone please provide me a Solution ? Is there any way adding any cost effective solution in Branch
side so that Calls to PSTN should be gone through Branch side PSTN line itself and Calls to HQ should be gone through VPN.
Solved! Go to Solution.
09-25-2012 05:05 AM
You need to have a voice gateway at that location, depending on the number of calls. Most customers for users at branch locations that only have 1 phone will send all calls through the tunnel to HQ and redirect 911 calls locally using a small voice gateway like a 881
Thanks
Srini
09-25-2012 05:05 AM
You need to have a voice gateway at that location, depending on the number of calls. Most customers for users at branch locations that only have 1 phone will send all calls through the tunnel to HQ and redirect 911 calls locally using a small voice gateway like a 881
Thanks
Srini
09-25-2012 05:38 AM
Thank You much For your Valuable info Srini..!!!
So if i have a gateway in branch things will solve.
But The Branch office doesnt have a public ip. So i think Site to site VPN is not Possible.
Can i use 881 Router as a Remote VPN Client to 2901 VPN server and there by adding
881 in CUCM of HQ ?
09-25-2012 08:57 AM
You can use the 881 as the voice gateway and also have a VPN tunnel back to HQ
Thanks
Srini
09-25-2012 08:58 AM
Isn’t the 881SRST EOL?
Ryan Ticer Network/Convergence Engineer
916.577.1741 | rticer@team-sos.com<mailto:rticer@team-sos.com>
09-25-2012 09:00 AM
I still see it just fine in DCT, 880 Yes not 881
http://www.cisco.com/en/US/prod/collateral/routers/ps380/end_of_life_notice_c51-714000.html
Srini
09-25-2012 09:01 AM
Nevermind.
Ryan Ticer Network/Convergence Engineer
916.577.1741 | rticer@team-sos.com<mailto:rticer@team-sos.com>
09-25-2012 09:44 AM
Srini , What is this Tunnel Back to HQ.. That means we dont need any Public IP on Branch side. Still the 881 will register with HQ CUCM as a Gateway ? So the 9971 Phone will register to CUCM through 881 ?
09-25-2012 10:01 AM
The 9971 will register behind the VPN tunnel that the 881 will originate.
Thanks
Srini
09-25-2012 11:54 AM
OK.. that means The 881 Router can act as a Client for 2901 Router ( VPN Server) ?
09-25-2012 12:30 PM
Yes that could be one solution
Thanks
Srini
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide