Hi.
Yes it is in the ip telephony forum.
Though here is your answer in case you dont find it.
Setting up Outlook to Dial IP Phones
1) Download AV Cisco tsp from Cisco website.
2) Install TSP on local workstation
3) After installation go to control panel open Phone and Modem options
4) Click on advanced tab
5) Double click on CiscoTSP
6) Click on the User tab (Put in your username and password, this must match the username information that is entered callmanager for your ccmuser account. If this does not match this will not work)
7) Click on CTI Manager tab and put in ip address of publisher in Primary CTI Manager Location and the ip of subscriber in Backup CTI Manager Location.
8) Apply settings and close out of control panel.
9) Open Outlook click on contacts
10) Choose a contact with whom you want to call. Click on dial from the toolbar choose number (Business, home, mobile) Click on dial properties and choose the Cisco line.
11) If you do not see Cisco line,try restarting outlook. You should be able to scroll through the different types of lines.
12) Once you have chosen the Cisco line click ok.
13) Choose start call and you should be all set.
