CALL-MANAGER-FALLBACK

[julio.pacheco01]

I have an ISR which is configured as call-manager-fallback, but I would like the dn not to assign them in automatic, in a router 3745 there was the max-dn 10 reserved 2 command and with that I was allowed to configure the dn.
Does anyone know if in ISR that is possible?
Thank you

[sjvitales]

Hello Julio.

The SRST service don't assign anything automatic, remember that after you configure the SRST reference and the proper commands in the GW, this download the DN configuration of each Phone, so when the Fall-Back in active, your phone will configure with the same CUCM DN and description, you don't need to worry about this.

Regards.

[julio.pacheco01]

My problem is that a line is a hot line and when it is in SRST mode it does not work and it does not show me the name of each line in the phones once it is in SRST, so I wanted to modify the ephones-dn.

Thank you.

[sjvitales]

Julio, Remember SRST offer limited features or basic features, maybe you
need to look CME in SRST Mode.

Regards.

[julio.pacheco01]

Thanks, so I have a GW The problem is that for incoming flames for FXO does not work for h323 I have to create a SIP trunk, to make it work, I thought you could do something in CALL-manager-fallback, thanks for the help.