08-12-2013 02:10 AM - edited 03-19-2019 07:07 AM
Dear sir,
I have three sites, one HQ and two branch sites.
HQ ==> 50 voice users
Site A ==> 30 voice users
Site B ==> 30 voice users
I want the HQ site to be the main call processing center, while the two site will be in srst mode(if HQ fails).
please help me validate/check if this BoM is ok.
br
kuku
Item Name | Description | Quantity |
HQ | ||
C2951-CME-SRST/K9 | 2951 UC Bundle w/ PVDM3-32 FL-CME-SRST-25 UC License PAK | 1 |
CON-SNT-2951CMST | SMARTNET 8X5XNBD 2951 Voice Bundle w/ UC License PAK | 1 |
S2951UK9-15204M | Cisco 2951 IOS UNIVERSAL | 1 |
FL-CME | Cisco Communications Manager Express License | 1 |
FL-CME-SRST-25 | Communication Manager Express or SRST - 25 seat license | 1 |
PWR-2921-51-AC | Cisco 2921/2951 AC Power Supply | 1 |
CAB-ACU | AC Power Cord (UK) C13 BS 1363 2.5m | 1 |
FL-CME-SRST-25 | Communication Manager Express or SRST - 25 seat license | 1 |
Site A and Site B | ||
C2921-CME-SRST/K9 | 2921 UC Bundle w/ PVDM3-32 FL-CME-SRST-25 UC License PAK | 2 |
CON-SNT-2921CMST | SMARTNET 8X5XNBD 2921 Voice Bundle w/ UC License PAK | 2 |
S29UK9-15204M | Cisco 2901-2921 IOS UNIVERSAL | 2 |
FL-SRST | Cisco Survivable Remote Site Telephony License | 2 |
FL-CME-SRST-5 | Communication Manager Express or SRST - 5 seat license | 2 |
PWR-2921-51-AC | Cisco 2921/2951 AC Power Supply | 2 |
CAB-ACU | AC Power Cord (UK) C13 BS 1363 2.5m | 2 |
FL-CME-SRST-25 | Communication Manager Express or SRST - 25 seat license | 2 |
08-12-2013 06:38 AM
Are you proposing CME solution or did you mean to do CUCM/BE6K? Your quote has only gateways with no user licenses, no servers, no phones, no voice cards for PSTN access, etc.
HTH,
Chris
08-12-2013 07:05 AM
thanks for your reply..
what am planning to achieve is to have in HQ(50 voice user) and site A(30 voice user) and site B(30 voice user), where HQ will be the main call processing center, while site A and B will be the srst(if HQ fails).
Am trying to propose a CME solution. i will use cisco cp-7942g for all the phones and vic2-2fxo for the PSTN access.
please check if this is ok or suggest an alternative/additional BoM.
br
kuku
08-12-2013 07:10 AM
Every CME is an independent system, you can surely steer calls anyway you want them to go via dial-peers, but it may get little challenging for some scenarios. Is there a reason you do not want to propose centrelized system such as BE6K?
What is your PSTN connectivity, is it SIP or TDM based i.e. PRI? If the second I dont see any voice cards, also do you have a requirement for any analog devices? If so where are they connected to?
HTH, please rate all useful posts!
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide