Can't Recieve Calls on my Analogue phone (port 0/0/0)

NelsonCBN · ‎04-26-2013

I I have configured the following dial peers on my UC560. I can call out but when a call comes in, it doesnt get to the analog telephone on the voice port 0/0/0.

What am I not doing well?

dial-peer voice 1 pots

incoming called-number .

direct-inward-dial

port 0/3/0:15

dial-peer voice 90 pots

destination-pattern .T

port 0/3/0:15

dial-peer voice 10 pots

destination-pattern 99043700

port 0/0/0

forward-digits all

Chris Deren · ‎04-26-2013

Please post "debug isdn q931" and "debug voice dialpeer"

Chris

NelsonCBN · ‎04-26-2013

debug isdn q931

*Apr 26 13:31:45.043: ISDN Se0/3/0:15 Q931: Received SETUP callref = 0x8A73 cal

lID = 0x000B switch = primary-net5 interface = User

*Apr 26 13:31:45.047: ISDN Se0/3/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0x

8A73

Channel ID i = 0xA9839E

Exclusive, Channel 30

*Apr 26 13:31:45.051: ISDN Se0/3/0:15 Q931: TX -> CONNECT pd = 8 callref = 0x8A

73

*Apr 26 13:31:45.391: ISDN Se0/3/0:15 Q931: RX <- CONNECT_ACK pd = 8 callref =

0x0A73

*Apr 26 13:31:45.391: %ISDN-6-CONNECT: Interface Serial0/3/0:29 is now connected

to 8131694027 N/A

*Apr 26 13:31:49.035: ISDN Se0/3/0:15 Q931: RX <- DISCONNECT pd = 8 callref = 0

x0A73

Cause i = 0x8090 - Normal call clearing

Progress Ind i = 0x8288 - In-band info or appropriate now available

*Apr 26 13:31:49.035: %ISDN-6-DISCONNECT: Interface Serial0/3/0:29 disconnected

from 8131694027 , call lasted 3 seconds

*Apr 26 13:31:49.035: ISDN Se0/3/0:15 Q931: call_disc: PI received in disconnect

; Postpone sending RELEASE for callid 0xB

*Apr 26 13:31:49.039: ISDN Se0/3/0:15 Q931: TX -> RELEASE pd = 8 callref = 0x8A

73

*Apr 26 13:31:49.203: ISDN Se0/3/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref =

0x0A73

NelsonCBN · ‎04-26-2013

debug voice dialpeer:

CBN-AFRICA#debug voice dialpeer Se0/3/0:15 Q931: Sending SETUP

voip dialpeer default debugging is on99: //-1/9025F1B98046/DPM/dpMatchPeer

CBN-AFRICA#l history

!

*Apr 26 13:35:36.707:

e=DIALPEER_INFO_SPEECH

*Apr 26 13:35:36.707: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=2

*Apr 26 13:35:36.707: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0

*Apr 26 13:35:36.707: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=8131694027, Called Number=3700, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_FAX

*Apr 26 13:35:36.707: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=NO_MATCH(-1) After All Match Rules Attempt

*Apr 26 13:35:36.707: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=-1

*Apr 26 13:35:37.059: %ISDN-6-CONNECT: Interface Serial0/3/0:29 is now connected

to 8131694027 N/A

*Apr 26 13:35:43.015: %ISDN-6-DISCONNECT: Interface Serial0/3/0:29 disconnected

from 8131694027 , call lasted 5 seconds

*Apr 26 13:35:43.023: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=.T, Called Number=, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

*Apr 26 13:35:43.023: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=NO_MATCH(-1) After All Match Rules Attempt

*Apr 26 13:35:43.023: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=-1

Chris Deren · ‎04-26-2013

This debug shows that call is matching dial peer 2 (which you did not provide) on the inbound side, but then is unable to match any outbound dialpeers, the called number here shows 3700, yet your dial-peer 10 has destination-pattern 99043700.

Chris

NelsonCBN · ‎04-26-2013

Chris, I changed the dial-peer from 10 to 2 ten is off now.

my DID number is 099043700 (why is it showing 3700?)

Peer Info Type=DIALPEER_INFO_SPEECH

*Apr 26 13:42:02.271: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=2

*Apr 26 13:42:02.271: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0

*Apr 26 13:42:02.271: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=8131694027, Called Number=3700, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_FAX

*Apr 26 13:42:02.271: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=NO_MATCH(-1) After All Match Rules Attempt

*Apr 26 13:42:02.271: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=-1

*Apr 26 13:42:02.623: %ISDN-6-CONNECT: Interface Serial0/3/0:30 is now connected

to 8131694027 N/A

*Apr 26 13:42:08.183: %ISDN-6-DISCONNECT: Interface Serial0/3/0:30 disconnected

from 8131694027 , call lasted 5 seconds

*Apr 26 13:42:08.187: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=.T, Called Number=, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

*Apr 26 13:42:08.187: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=NO_MATCH(-1) After All Match Rules Attempt

*Apr 26 13:42:08.187: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=-1

Chris Deren · ‎04-26-2013

Is this complete debug? It does not show any called number.

Chris

NelsonCBN · ‎04-26-2013

*Apr 26 13:31:49.035: %ISDN-6-DISCONNECT: Interface Serial0/3/0:29 disconnected: L3_ProcessEvent: callref = 0x0000 Corwar

Calling Number=, Called Number=080

from 8131694027 , call lasted 3 secondsETUP_REQ:U0_SetupReq(nlcb)990437004/0RIC

*Apr 26 13:31:49.035: ISDN Se0/3/0:15 Q931: call_disc: PI received in disconnectMatchPeersCore:aut

no modem enable-dial-peer)#dest

line

source_id = Q.

; Postpone sending RELEASE for callid 0xB DL_DATA_REQ 0x0More--its - re

*Apr 26 1

*Apr 26 13:31:49.039: ISDN Se0/3/0:15 Q931: TX -> RELEASE pd = 8 callref = 0x8A 4 int_id = 0x888DC8FC datasize = 49peer v

Dial String=08036, Expanded String

7303

*Apr 26 13:31:49.203: ISDN Se0/3/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = Timeout=FALSE, Is Incoming

*Apr 26 13:25:38.827: 888DC8FC00000300024004000001

0x0A73:44:31

CBN-AFRICA#no debug all lasted no exec s

!R

*Apr 26 13:31:49.035: %ISDN-6-DISCONNECT: Interface Serial0/3/0:29 disconnected: L3_ProcessEvent: callref = 0x0000 Corwar

Calling Number=, Called Number=080

from 8131694027 , call lasted 3 secondsETUP_REQ:U0_SetupReq(nlcb)990437004/0RIC

*Apr 26 13:31:49.035: ISDN Se0/3/0:15 Q931: call_disc: PI received in disconnectMatchPeersCore:aut

no modem enable-dial-peer)#dest

line

source_id = Q.

; Postpone sending RELEASE for callid 0xB DL_DATA_REQ 0x0More--its - re

*Apr 26 1

*Apr 26 13:31:49.039: ISDN Se0/3/0:15 Q931: TX -> RELEASE pd = 8 callref = 0x8A 4 int_id = 0x888DC8FC datasize = 49peer v

Dial String=08036, Expanded String

7303

*Apr 26 13:31:49.203: ISDN Se0/3/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = Timeout=FALSE, Is Incoming

*Apr 26 13:25:38.827: 888DC8FC00000300024004000001

0x0A73:44:31

CBN-AFRICA#no debug all lasted no exec s

!R

NelsonCBN · ‎04-26-2013

This is my new dial-peer configurations

dial-peer voice 2 pots

destination-pattern .T

port 0/3/0:15

!

dial-peer voice 3 pots

destination-pattern .T

port 0/0/0

forward-digits all

!

dial-peer voice 4 pots

incoming called-number 099043700

direct-inward-dial

IS ANYTHING WRONG WITH IT?

Chris Deren · ‎04-26-2013

It is showing 4 digits as that is probably how the PRI is defined for sign digits. Simply change your dial-peer 10 to use 3700 as the destination pattern to make it work.

Chris

NelsonCBN · ‎04-26-2013

This is my new debug voice dialpeer:

*Apr 26

CBN-AFRICA#: //-1/9025

CBN-AFRICA# Peer Info

CBN-AFRICA#ER_INFO_SPE

CBN-AFRICA#

Building

Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

*Apr 26 13:52:30.015: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=2

*Apr 26 13:52:30.015: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0

*Apr 26 13:52:30.015: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=8131694027, Called Number=3700, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_FAX

*Apr 26 13:52:30.015: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=NO_MATCH(-1) After All Match Rules Attempt

*Apr 26 13:52:30.015: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=-1

*Apr 26 13:52:30.363: %ISDN-6-CONNECT: Interface Serial0/3/0:30 is now connected

to 8131694027 N/A

*Apr 26 13:52:31.131: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=.T, Called Number=, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

*Apr 26 13:52:31.131: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=NO_MATCH(-1) After All Match Rules Attempt

*Apr 26 13:52:31.131: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=-1

Chris Deren · ‎04-26-2013

Please post your full config.

Chris

NelsonCBN · ‎04-26-2013

This is my running config:

Current configuration : 2060 bytes

!

! Last configuration change at 14:01:34 UTC Fri Apr 26 2013

!

version 15.0

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname CBN-AFRICA

!

boot-start-marker

boot-end-marker

!

card type e1 0 3

!

no aaa new-model

!

network-clock-participate wic 3

!

dot11 syslog

ip source-route

ip cef

!

no ipv6 cef

!

multilink bundle-name authenticated

isdn switch-type primary-net5

!

voice-card 0

!

license udi pid UC560-T1E1-K9 sn FGL1525141N

!

controller E1 0/3/0

pri-group timeslots 1-31

!

interface GigabitEthernet0/0

no ip address

duplex auto

speed auto

!

interface Integrated-Service-Engine0/0

description Loopback interface used to manage integrated application module

no ip address

shutdown

!

interface GigabitEthernet0/1/0

!

interface GigabitEthernet0/1/1

!

interface GigabitEthernet0/1/2

!

interface GigabitEthernet0/1/3

description Interface used to communicate with integrated service modue

!

interface Serial0/3/0:15

no ip address

encapsulation ppp

isdn switch-type primary-net5

isdn overlap-receiving

isdn incoming-voice voice

no cdp enable

!

interface Vlan1

ip address 192.168.10.1 255.255.255.0

!

ip forward-protocol nd

!

no ip http server

no ip http secure-server

!

control-plane

!

voice-port 0/0/0

!

voice-port 0/0/1

!

voice-port 0/0/2

!

voice-port 0/0/3

!

voice-port 0/3/0:15

!

voice-port 0/1/0

!

voice-port 0/1/1

!

voice-port 0/1/2

!

voice-port 0/1/3

!

voice-port 0/4/0

auto-cut-through

signal immediate

input gain auto-control

description Music On Hold Port

!

dial-peer voice 2 pots

destination-pattern .T

port 0/3/0:15

!

dial-peer voice 3 pots

destination-pattern 3700

port 0/0/0

forward-digits all

!

dial-peer voice 4 pots

incoming called-number 099043700

direct-inward-dial

!

line con 0

no modem enable

line aux 0

line 2

no activation-character

forward-digits all

!

dial-peer voice 4 pots

incoming called-number 099043700

direct-inward-dial

!

line con 0

no modem enable

line aux 0

line 2

no activation-character

no exec

transport preferred none

transport input all

speed 115200

line vty 0 4

login

!

end