centralized CUE ?

[Mohammed Al-odhari]

hi

the below is the specifications for a cisco unity which is already installed in a cisco cme for 45 users..... ?

1- ONE NME-CUE 8 ports

2- cisco unity express 3.2

3- ONE unity express licence 100 voice mailbox autoattendent (SCUE-LIC-100CME)

4- ONE unity express IVR 4sessions(SCUE-IVR-S4)

Can i use the above cisco unity which is already installed in a cisco cme for 45 users in another branch which also using cisco cme for 25 users(centralized) for voice mail ,autoattedent and ivr as the both cme are connected via WAN...........?

if yes can you please provide me maybe a link or a pdf to configure the centralized cue.....................?

[Jaime Valencia]

That's not supported.

Unsupported Deployments

•A "centralized" Cisco Unity Express model where a single Cisco Unity Express system provides voice mail to IP phones at more than one Cisco CME or Cisco SRST site.

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/unity_exp/design/design21/cuemodel.html#wp1008390

You need to get another CUE for the other branch.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

[Mohammed Al-odhari]

thanks for your replay.

can you open this link and see the second feature in the table and replay me with explaination please.

http://www.unifiedlan.com/cisco-unity-express-ntwk-mod-enh-spare.htm

regards,

[clileikis]

Hi Mohammed,

Check out the following post:

https://supportforums.cisco.com/message/1130004#1130004

I believe centralized is supported with CUE version 3.2 and onwards.  I'm not too sure if all of the CUE design documentation has been brought up to date.

Thanks,

Chris