cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
397
Views
0
Helpful
1
Replies

Cisco Unity Version 8.0.3 Installation Error.

yakubpangat
Level 1
Level 1

Hi Guys,

        I'm installing Unity 8.0 on windows server 2003 server. During the installation i'm getting an error like "setup was unable to configure default settings on your system" I here attach the error print sreen. What will be the issue?

1 Accepted Solution

Accepted Solutions

Gajanan Pande
Cisco Employee
Cisco Employee

There is bug with exactly same symtoms but it is for Unity 4.x. You might want to try the workaround for your Unity 8 to see if it helps still.

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsf97662

Sorry, couldnt find much on Unity 8.x side.

GP.

View solution in original post

1 Reply 1

Gajanan Pande
Cisco Employee
Cisco Employee

There is bug with exactly same symtoms but it is for Unity 4.x. You might want to try the workaround for your Unity 8 to see if it helps still.

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsf97662

Sorry, couldnt find much on Unity 8.x side.

GP.