11-03-2011 03:29 AM - edited 03-19-2019 03:54 AM
Hi All,
The Meetme conference is not working, when show dspfarm, the status is ASSOCIATION IN PROGRESS as below:
router#sh dspfarm all
Dspfarm Profile Configuration
Profile ID = 1, Service = CONFERENCING, Resource ID = 1
Profile Description :
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : RESOURCE ALLOCATED
Application : SCCP Status : ASSOCIATION IN PROGRESS
Resource Provider : FLEX_DSPRM Status : UP
Number of Resource Configured : 8
Number of Resource Available : 8
Maximum conference participants : 8
Codec Configuration: num_of_codecs:5
Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required
SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED
0 5 28.3.1 UP N/A FREE conf 1 - - -
0 5 28.3.1 UP N/A FREE conf 1 - - -
0 5 28.3.1 UP N/A FREE conf 1 - - -
0 6 28.3.1 UP N/A FREE conf 1 - - -
0 6 28.3.1 UP N/A FREE conf 1 - - -
0 6 28.3.1 UP N/A FREE conf 1 - - -
0 6 28.3.1 UP N/A FREE conf 1 - - -
0 6 28.3.1 UP N/A FREE conf 1 - - -
Running in Cisco Unity Express 8.5.1 and IOS is c3900e-universalk9-mz.SPA.151-4.M1.bin
Dspfarm configuration as below:
telephony-service
sdspfarm conference mute-on 111 mute-off 222
sdspfarm units 4
sdspfarm tag 1 POSNFKSA
conference hardware
max-ephones 300
max-dn 500
ip source-address 11.11.11.11 port 2000
timeouts interdigit 3
load 7916-24 B016-1-0-4.loads
load 7911 SCCP11.8-5-2S.loads
load 7975 SCCP75.8-4-1S.loads
time-zone 42
date-format dd-mm-yy
max-conferences 8 gain -6
transfer-system full-consult
secondary-dialtone 9
sccp local GigabitEthernet0/0
sccp ccm 11.11.11.11 identifier 1 priority 1 version 7.0
sccp
sccp ccm group 1
bind interface GigabitEthernet0/0
associate profile 1 register POSNFKSA
dspfarm profile 1 conference
codec g711ulaw
codec g729ar8
codec g729br8
codec g729r8
codec g711alaw
maximum sessions 8
conference-join custom-cptone jointone
conference-leave custom-cptone leavetone
associate application SCCP
voice-card 0
dspfarm
dsp services dspfarm
ephone-dn 190 dual-line
number 1690 no-reg primary
conference meetme
Is there anything that i missing out?
11-03-2011 06:07 AM
Hi there,
There are some good troubleshooting tips in this excellent doc from Tony @ Cisco
https://supportforums.cisco.com/docs/DOC-9464
Cheers!
Rob
PS: one thing I'm curious about is the "version" in
sccp ccm 11.11.11.11 identifier 1 priority 1 version 7.0
11-03-2011 09:04 AM
but that is no option for enter version 8.5
11-03-2011 12:26 PM
Have you tried leaving the version out of the command and doing a no sccp/sccp??
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
12-07-2012 12:30 AM
If somebody have faced with the same trouble try to add:
sccp ccm group 1
associate ccm 1 priority 1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide