06-14-2015 05:38 PM - edited 03-19-2019 09:42 AM
I am running CME version 8.6
When my customer is trying to dial a long distance number, lets say for this example the number is 915556667777, it randomly selects dial-peer 130 or 150. When it matches 130 it prefixes 727 and the call then is routed to 7279155566. Below is snippets from my configuration. If I change dial-peer 130 from destination-pattern 9T to destination-pattern 9[2-9]T would that fix the issue from matching 130? Any help would be greatly appreciated.
*************dial-peer snippet*************
dial-peer voice 130 pots
trunkgroup FXO_Trunk
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
destination-pattern 9T
forward-digits 7
prefix 727
no sip-register
dial-peer voice 150 pots
trunkgroup FXO_Trunk
description ***North American 10-Digit Long Distance***
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
destination-pattern 91[2-9]..[2-9]......
forward-digits all
no sip-register
dial-peer voice 160 pots
trunkgroup FXO_Trunk
description ***North American 10-Digit Long Distance***
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
destination-pattern 9[2-9].........
forward-digits all
no sip-register
*************dial-peer snippet*************
*************voice translation snippet*************
voice translation-rule 1000
rule 1 /^9/ //
!
voice translation-rule 1100
rule 1 /^...$/ /7279381516/
!
voice translation-rule 1500
rule 1 /^6/ //
!
!
voice translation-profile OUTGOING_TRANSLATION_ALL
translate calling 1100
!
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1000
!
voice translation-profile Transfer_to_Voicemail_Profile
translate redirect-called 1500
*************voice translation snippet*************
*************telephony-service snippet*************
telephony-service
sdspfarm units 1
sdspfarm tag 1 xxxxx
group 1
ip source-address x.x.x.x port 2000
url services http://x.x.x.x/voiceview/common/login.do
url authentication http://x.x.x.x/voiceview/authentication/authenticate.do
!
internal-call moh-group 1
pin xxxxx override
fxo hook-flash
max-ephones 58
max-dn 192
max-redirect 20
auto assign 20 to 60
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service dnis overlay
service dnis dir-lookup
timeouts interdigit 5
timeouts busy 5
timeouts ringing 30
load 7914 S00105000400.sbn
load 7912 CP7912080004SCCP080108A.sbin
load 7960-7940 P0030801SR02.loads
time-zone 12
voicemail 200
max-conferences 3 gain -6
call-forward pattern .T
hunt-group logout HLog
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 9.T
transfer-pattern 6.... blind
transfer-pattern 6... blind
secondary-dialtone 9
login timeout 60
fac standard
*************telephony-service snippet*************
06-14-2015 06:20 PM
It means you have an overlapping dial-peer. You can control this by having a specific destination-pattern which you already did. Other way is by putting "preference" command on each dial-peer. By default all dial-peers have preference 0.
Have a look at this documentation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/voice/configuration/guide/fvvfax_c/vvfpeers.html#wp1244361
06-14-2015 06:29 PM
But would my solution I provided above work?
If I change dial-peer 130 from destination-pattern 9T to destination-pattern 9[2-9]T would that fix the issue from matching 130?
06-14-2015 06:53 PM
No, it won't match dial-peer 130 but will match dial-peer 150. Use this command to test which dial-peer is matching - "show dialplan number XXXX".
I'd suggest to have separate dial-peers for local, national, international, emergency, toll-free, etc numbers. This is to avoid the issue you are experiencing.
06-14-2015 06:59 PM
I want it to match 150 so that is a good thing and thank you for the command. I will try that.
Also I do have dial-peers for national, international, emergency but didn't list them here. Only listed the dial peers that were causing the issue
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide