Configuring Shared Line between a SIP/SCCP Phone on CUCME

[azeez.raheem1]

Hi all,

I ran the config below for a shared line between this 2 phones 7925G (wireless SCCP handset) and a 7821, but the SIP phone wouldn't work.

Can anyone please advise?

Router- Cisco 2921 using CUCME

Router firmware- 15.4

Phone firmware- 10-2-1-12SR1-4

voice register pool 41

busy-trigger-per-button 2

id mac 8890.8D68.1580

type 7821

number 1 dn 41

template 1

dtmf-relay rtp-nte

codec g711alaw

no vad

ephone-dn 41 octo-line

number 241

label Tony

description Tony

shared-line sip

[Manish Gogna]

Cisco Unified CME 9.0 and later versions support the mixed Cisco Unified SIP/SCCP shared line. This feature allows Cisco Unified SIP and SCCP IP phones to share a common directory number

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmebasic.html#pgfId-1081127

Can you share the voice register dn config as well as do it as per the following

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmebasic.html#26795

1. enable

2. configure terminal

3. voice register dn dn-tag

4. number number

5. shared-line [ max-calls number-of-calls ]

6. huntstop channel number-of-channels

7. end

Manish

- Do rate helpful posts -

[azeez.raheem1]

Many thanks Manish, will give that a go and let you know the result.

[OBINNA EMESORONYE]

Hello Azeez,

Please share the outcome of your test.

Regards,