cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1413
Views
5
Helpful
6
Replies

configuring snmp v3 on call manager 8.6

Hello all,

Should I be to restart snmp master agent during production hours?  It says I would need to also restart the hsot resources agent as well.  Would this effect calling or anything else aside from snmp traffic?

1 Accepted Solution

Accepted Solutions

Chris Deren
Hall of Fame
Hall of Fame

Yes, you can safely restart SNMP master service, it will not affect any call processing.

HTH,

Chris

View solution in original post

6 Replies 6

Chris Deren
Hall of Fame
Hall of Fame

Yes, you can safely restart SNMP master service, it will not affect any call processing.

HTH,

Chris

Thanks Chris.  Do you know what the host resources agent is doing?

Not quite, where do you see that?

Chris

When I am about to associate the nodes to the smnp user.  It says something like restarting the snmp master agent also restarts the host resources agent if it is running.

I have done it many times during production hours without any issues.

HTH, please rate all helpful posts!

Chris

do the control center feature services of

Cisco CallManager SNMP Service as well as the network feature services need to be running?