cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
384
Views
10
Helpful
1
Replies

CUCM 11.5 Service Parameter change

ziqex
Level 4
Level 4

Hello everyone,

 

I want to change Local route group for redirected calls in the service parameters of CUCM.

This service is cluster wide parameter, feature - general.

I have two servers in the drop down list for the call manager service.

Should I change this option on both servers or after changing for one server the setting will be automatically changed for the second server one as well. 

Thank you

Regards,

Daniel

 

 

1 Accepted Solution

Accepted Solutions

TONY SMITH
Spotlight
Spotlight

Clusterwide settings only need to be set on one server, I usually select the Publisher but don't suppose it make any difference.  You can see it for yourself by setting the parameter, then select a different server and have a look at the parameter.

View solution in original post

1 Reply 1

TONY SMITH
Spotlight
Spotlight

Clusterwide settings only need to be set on one server, I usually select the Publisher but don't suppose it make any difference.  You can see it for yourself by setting the parameter, then select a different server and have a look at the parameter.