CUCM 6.1.2 and license

[Mohd Marzuki]

I have one MCS7816I3 at my office's lab running CUCM 6.1.2.1000-13 loaded with license. I want to upgrade up to 7.x or maybe 8.x depend on the hardware compatibility. My upgrade path would be 6.1.2 > 6.1.4 > 7.x > 8.x but Cisco isn't release anymore ISO for the 6.x. on the download page.

Can i extract the license *.lic from the console and fresh install e.g 7.x and re-load that license? Any issue with that?

Thanks

[Manish Gogna]

Hi Mohd,

No, the license will not work that way. You can only use the original license issued to you by Cisco TAC licensing team.

Manish

- Do rate helpful posts -

[Mohd Marzuki]

Hi Manish,

This is for lab test only, no commercial add up require. thats why i just need to upgrade up to the 7.x or maybe 8.x depends on the hardware.

[Manish Gogna]

Even for lab purpose you will need access to the upgrade file and licenses for 7.x / 8.x versions that you upgrade to.

Manish

[Manish Gogna]

Even for lab purpose you will need access to the upgrade file and licenses for 7.x / 8.x versions that you upgrade to.

Manish

[Manish Gogna]

You may however work with your Cisco Account team or contact TAC in case you want to upgrade to a shipping 10.x or 11.x version.

Manish