02-07-2019 03:23 AM
Hi all.
I want to add a billing application server to CUCM whose FTP is not using the default port.
The Host Name or IP Address field only accepts an IP address without port number.
Application billing server = FTP = 192.168.1.1 2001.
How do I enter it?
02-07-2019 04:22 AM
The norm is a colon. 192.168.1.2:2001. If that doesn’t work it likely isn’t supported.
02-07-2019 05:06 AM
Thanks for the response.The colon doesn't to work. Any other suggestions?
I believe it must be supported as the default port is not always a must for FTP.
02-07-2019 05:57 AM
No, it is not supported.
If the billing server you have was certified for Cisco CUCM, it should know it cannot use any other port.
02-09-2019 09:52 PM
I wish in future Cisco allows us to use a port of our choice to suit our security and move away from defaults.
02-10-2019 04:11 PM
Submit a PER via your SE/AM so this can be considered in the future.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide