05-31-2017 04:39 AM - edited 03-19-2019 12:29 PM
Hi Gang,
We're currently running a CUCM Pub and Sub on version 10.5.2.13901-2. I've built a further sub with the same version i.e. 10.5.2.13901-2.
I'm stuck getting the new sub to pass the install:
Just wandering if the community has come across the same issue? It must be to do with the security password for the Publisher being incorrect, but it would be interesting to see you guys have any alternative opinions?
New sub is configured in the Publishers System Server and System CUCM, IP config is as it should be.
Thanks,
Daniel
Solved! Go to Solution.
05-31-2017 05:01 AM
Hi Daniel,
On PUB CLI "run sql select * from processnode" see that the new SUB his showing there. If that's the case it has to be security password. Are you not sure what security password is?
JB
05-31-2017 05:01 AM
Hi Daniel,
On PUB CLI "run sql select * from processnode" see that the new SUB his showing there. If that's the case it has to be security password. Are you not sure what security password is?
JB
05-31-2017 06:53 AM
Thanks for that, it does appear!
Correcto, it is the bloody security password :(. No one left any docs behind so trying to gather all known passwords :(.
Many thanks for the help,
Daniel
05-31-2017 07:05 AM
You can recover the password:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/cucos/8_6_1/cucos/osg_861_cm/iptpch2.html#wp1053218
05-31-2017 07:23 AM
Hi Daniel,
You can also recover the existing security password see below.
https://supportforums.cisco.com/discussion/13273876/how-check-current-cucm-security-password
(Rate if it helps)
JB
05-31-2017 06:33 AM
is the new virtual machine in correct vSwitch? Are all serves properly defined in DNS with forward and reverse lookups?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide