cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1194
Views
5
Helpful
3
Replies

CUCM Version 14 Hardware Support - Dell Poweredge

C_Noble
Level 1
Level 1

I arrived at a new customer site and they have installed CUCM version 14 on Dell PowerEdge R440.

I cannot locate any Cisco documentation specifically stating that CUCM is supported on Dell PowerEdge.

Can anyone direct me to documentation which states if it is supported?

I prefer to recommend Cisco UCS hardware to the customer, but need proof of no support for Dell.

1 Accepted Solution

Accepted Solutions

A_
Level 1
Level 1

Is it a Xeon 4100 CPU? It's supported for deployments of < 1K users and < 2.5K devices.

 

You can read the requirements in this document: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/cisco-collaboration-infrastructure.html

View solution in original post

3 Replies 3

A_
Level 1
Level 1

Is it a Xeon 4100 CPU? It's supported for deployments of < 1K users and < 2.5K devices.

 

You can read the requirements in this document: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/cisco-collaboration-infrastructure.html

This is exactly what i was searching for.  Thank you!

Jaime Valencia
Cisco Employee
Cisco Employee

There is no such documentation that tells you which vendors/models are not supported / supported, there is however, documentation that states which are the HW/SW requirements for Cisco UC to be supported on non Cisco HW you intend to use, as long as you meet all the requirements outlined, it's supported.

HTH

java

if this helps, please rate