09-14-2010 02:09 PM - edited 03-19-2019 01:35 AM
Hello,
Can the CUCME 8.0 and UCC work with IP Phones 6900 (presence services,call handling, etc.)?
Regards,
09-15-2010 05:19 AM
Hello Rene,
As you can see in the CME Matrix some of the 6900 phones are already supported in this version:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme80spc.htm
I would like to know the version of Call Connector that you are using or if is UCCX
HTH
Please rate this post if was helpful
Walter Solano
09-15-2010 07:15 AM
Hello Walter,
I want to use the last version of UCC (1.6.0).
Thanks,
09-15-2010 09:22 AM
Hello Rene,
Thank you for the information, I checked the documentation for this version of UCC and is compatible with CME 8.0
Table 6. Cisco Unified Communications Express Compatibility Requirements
Also If you check the white papers of UCC you can see that 6900 phones are compatible with this application
Table 1. Cisco and Microsoft Unified Communications Products
HTH
Please rate this post if was helpful
Walter Solano
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide