06-17-2015 03:33 AM - edited 03-19-2019 09:42 AM
Hi Experts ,
CWMS quit new to me .
We are going to upgrade the CWMS 1.1.1.9A to 2.5 ,It document it says there is direct upgrade .first need to update 1.5MR4 then upgrade to 2.5
Can you please explain whether i can directly upgrade or install CWMS 2.5 seperately and install the license from old
06-17-2015 04:21 AM
Hi Nishad,
You will need to follow the path documented in the upgrade guide:
To upgrade from 1.1 to 2.5 version as you are aware you need to first update to an intermediate version which is either 1.5MR4 or 1.5MR5.
Follow guidelines to update to 1.5MR4
http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/1_5/Administration_Guide/Administration_Guide_chapter_01000.html
Once the system is running 1.5MR4 or above you will need to upgrade the system to 2.5 version.
Follow guidelines to upgrade to 2.5 version
http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_5/Administration_Guide/Administration_Guide/Administration_Guide_chapter_01010.html
Update procedure overview
* Does not redeploy the system
* Requires an ISO file
* Used for updating to Minor Releases, Maintenance Releases, Patches, or Hotfixes
* Can use VMware Snapshots
Upgrade procedure overview
* Redeploys the system
* Requires an OVA file (which is about 10 GB)
* Used for upgrading to Major Releases
* Cannot use VMware Snapshots
HTH
Manish
06-17-2015 05:30 AM
Thanks manish
Whether I can directly install CWMS 2.5 and rehost the license ?
06-17-2015 05:32 AM
Hi Nishad,
It is not documented anywhere so i would say it is not a supported method.
HTH
Manish
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide