Difference between C8300-1N1S-6T vs C8300-1N1S-6T-V

[ednarvaez]

Hello community

Excuse me, could you help me with the difference between C8300-1N1S-6T vs C8300-1N1S-6T-V? I can't find information about C8300-1N1S-6T-V.

I would like to know if I can configure HA between 2 C8300-1N1S-6T-V devices?

Thanks for the help 

[liviu.gheorghe]

Hello @ednarvaez ,

the C8300-1N1S-6T-V is a C8300-1N1S-6T bundled with a NIM-PVDM-3, so basically the same router with some extra PVDM for voice processing.

If by HA you mean a gateway redundancy protocol like HSRP or VRRP, the answer is yes. Please see the link for details https://www.cisco.com/c/en/us/td/docs/routers/ios/config/17-x/ntw-servs/b-network-services/m_fhp-hsrp-mgo.html

HTH

HTH

[ednarvaez]

Oh sorry, by HA I meant Cisco CUBE High Availability

Like the following link:

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/voi-cube-high-availability-ISR4K.html

I see that the following models are compatible but I would like to confirm it

Thank you 

[Roger Kallberg · Accepted solution]

You can setup Cube HA on it as it’s the same type of router as the one without the -V.

[Roger Kallberg · Accepted solution]

The -V means that it’s a voice bundle. It’s literally the exact same router, just with additional modules preselected in the BoM.

[ednarvaez]

Thank you for your help

Regards

[Nithin Eluvathingal]

AFAIK, C8300-1N1S-6T-V give you NIM-PVDM-32 included in the Bundle.

2.12.0.0

[ednarvaez]

Hi community

Me again sorry,

Can I use the router C8300-1N1S-6T-V how a Local Gateway for a Webex Calling deployment?

Thank you a lot

Regards

[Roger Kallberg]

Yes with the appropriate licensing it would work.

[ednarvaez]

Excellent

Thank you Roger

Regards