04-13-2016 02:25 AM - edited 03-19-2019 10:59 AM
Hi, i have a setup with cisco CME, on the CME i have 32 SIP phones, and 8 conference bridges configured.
The CME have a SIP trunk to a external PBX.
The external PBX have a phone that should have privileges to force disconnect of single SIP phones in the conference. (f.ex dial a specific number)
Is this possible? and in that case how?
Thanks petter.
04-13-2016 09:25 AM
No, remote phones have no way to do any of that, things like that are only possible for phones registered to CME
04-21-2016 05:49 AM
yes this was in fact possible with EEM:
i turned on debug ccsip messages on startup.
user 204 is just a dummy number.
event manager applet kill
event syslog pattern "sip:204@10.1.10.1:5060 SIP/2.0"
action 1.0 cli command "enable"
action 2.0 cli command "clear call voice causecode 1 calling-number 200"
when a user on the external PBX dial 204 to the cisco router this EEM get activated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide