cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1595
Views
0
Helpful
4
Replies

eth0 IP address duplicate (CUCM on vSphere)

niyiadebayo
Level 1
Level 1

Please can you give give some insight into this error, I encountered an eth0 IP address duplicate conflict during installation. I have release the IP addresses, renewed them, even isolated the CUCM server, but I am stilling getting the same error. I will appreciate your support on this. Thanks. Kind Regards

4 Replies 4

Manish Gogna
Cisco Employee
Cisco Employee

Hi,

Can you share a screenshot of the error? Have you tried assigning different IP address statically and also tried pinging those IP's before applying the same to the CUCM VM?

Manish

- Do rate helpful posts -

Guys,

Let me first apologize for responding late, I was engaged on some issues. However, I've tried both suggestions, however find attached the screenshot

....

Deepak Rawat
Cisco Employee
Cisco Employee

Adding to what Manish said, right click on the VM >> Edit Settings and check if Network Adapter 1 is set to the correct Network or not as that may also cause network issues lot many times.

Regards

Deepak