cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
747
Views
0
Helpful
1
Replies

Failure to console to the MeetingPlace 3515 Media Server

plafond12
Level 1
Level 1

Hi All,

I have misplaced my Terminal Cable to console to the Meetingplace 3515 Media Server, mp-3515ms-av250.

I built one using the cable pinout provided by docwiki.cisco.com:

To Chassis (DB-9 Male)FunctionTo PC Terminal (DB-9 Female)

2

TXD

3

3

RXD

2

5

GND

5

My cable is tested to be OK, however, i'm getting no response from the device.

Has anyone faced a similar problem?

Thanks

1 Reply 1

iantra123
Level 3
Level 3

Hi,

Try with this:

Signal Name

Side 1
Side 2Signal
TD (Transmit Data)32RD
RD (Receive Data)23TD
RTS (Request to Send)78CTS
CTS (Clear To Send)87RTS
SG (Signal Ground)55SG
DSR (Data Set Ready)64DTR
CD ( Carrier Detect)14DTR
DTR (Data Terminal Ready)41CD
DTR(Data Terminal Ready)46DSR

There are no more document, but if Cisco says that it's a null modem cable, then it's a "full" null modem cable.

Not the 235 pinout only.

Regards,

Antra

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: