Group Calling In CUCM

[Yasir@1995]

Dear Team,

One of our customers comes up with a new requirement. 

They need to achieve group calling in IP phones. Please find the below scenario. 

If someone calling to a unique number say 7777, the call distributes to a group of extensions. 

and each participant in this group needs to attend the calls and convert these calls to group calls. 

I tried to configure the above scenario using the Line group, Hunt list, and Hunt pilot. But the calls cannot transfer to meeting calls. 

Hunt Pilot: 7777

Line Group:2084,2085,2070 , 

But when 2084 attends the calls hunting will stop and cannot achieve the above mentioned scenario.

Is there any other alternative method to achieve the above scenario? 

if 

[Nithin Eluvathingal · Accepted solution]

The feature what you are looking is blast dial AFAIK which is till not available on cucm and this can be Achieved if you have a CMS.

https://www.cisco.com/c/en/us/support/docs/conferencing/meeting-management/217203-how-to-configure-blast-dial-for-cms-spac.html