How I can Use Tandberg MXP 6000 with Web EX

[carolinecollet]

Hi,

We have a videoconference système from Tandberg (Now, buy by Cisco).

I would like to use this codec system with WebEx...  It is possible ?

And how ?

We use the system with internet actually...

Thank you ....

Caroline Collet

ISHEDD

[skilambi]

The list of supported endpoints is here, now since the MXP is a legacy product and isn;t actively supported/managed you won't see an official notice

WebEx Meeting Center Video Compatibility and Su... | Cisco Cloud Collaboration Help Central

However your best option is if you have VCS and MXP is registered to it and then dial the CMR URI

[carolinecollet]

Hi Mister Kilambi,

Hi understand that the system MXP 6000 can be use with Webex ?....

But how...  What is the procedure for connecting the Codex on the web for WebEx ?

We have an account WebEx and IP fix for the MXP ....

Thank you

Caroline Collet

[skilambi · Accepted solution]

The MXP needs to be able to dial a SIP URI. For WebEx you need a feature called CMR that is provided if your service is on the annuity platform otherwise you can only do web cam. If your account is CMR enabled you can dial a SIP URI from your endpoint. To dial a SIP URI, you need something to resolve the URI like VCS or UCM.

Hence my point above is that this needs a bit of background investigation on your end.

The CMR Cloud deployment guide for tehnical folks is here

Collaboration Meeting Rooms (CMR) Cloud Enterpr... | Cisco Cloud Collaboration Help Central

The other option is to set up the unit as H323 and ensure you set up a gatekeeper or DNS server that can resolve that URI something like meetingID@companyname.webex.com or userID@companyname.webex.com

The last point I made is MXP is not officially tested if you open the link above for CMR Cloud on WebEx so your YMMV

[Elter]

Hi, I was testing with a MXP F9.3.1 and I can dial out to the WebEx (WBS 30) URI using SIP and send/receive video, but the presentation does not work.

This MXP is registered to a VCS X8.7, but even with the VCS, the BFCP is not established (cannot send or receive presentation).

*The presentation works fine with another SIP destination.

Does anyone know if this usually works or not?

Thanks

[skilambi]

https://help.webex.com/docs/DOC-6428#reference_0E61FB790126C7DA458F5550747AB922

I don't even see the MXP listed in this link so I think it's not even tested

Thanks

Srini