IM & P 10.5.1 install or upgrade

[trimmy]

Using the Boot disk I am building an IM&P SUB after putting the CUCM PUB details in during the install process I get the error of mismatched versions. fair enough so I download and put on FTP the SU2 10.5.1.12900-2 and resinstall but the installation says there are no patches to be found. The FTP server is being used for CUCM upgrades and is working.

CUCM = 10.5.1.11900-13

IMP pub = 10.5.1.12900-2

I am trying to add an IM & P to the subcluster.

Error = Remote host contains no valid patches in directory.

the patch is UCSInstall_CUP_10.5.1.12900-2.sgn.iso

[john.welsh · Accepted solution]

Have you tried just installing direct from the 12900-2 image?  I downloaded that same image for a lab setup and it is bootable.  You should be able to boot from it without having to install it as a patch or anything.

[trimmy]

Thanks john.welsh we are trying this in a lab - will let you know - upgrading both subs and pub directly to SU1 works....its just when you come to add a new server I get the error.

[john.welsh · Accepted solution]

Great, let me know how it works out for you!