Integration Cisco CUCM and Microsoft Lync

[mukendra.janghu]

Hi All,

Is it possible to integrate Lync 2010 with Cisco Call Manager in version 6 ??

Personally, I think version 6 is quite old so may be there are problems of integration with lync 2010...

Waiting for your replies.

Regards,

Mukendra JANGHU

[Anas Abueideh]

Hi,

to do the integration between lync and Call manager you need VCS to do the integration

http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/X8-1/Cisco-VCS-Microsoft-Lync-Deployment-Guide-X8-1.pdf

HTH

Anas

don't forget to rate the helpful posts

[omgjames1]

Will this work for Lync in the cloud? 

[omgjames1]

I would like to provide call control from Lync using CUCM, but our Lync environment is hosted. 

[Andrew West]

That depends Anas. 

If you want to provide call control from Lync using a CUCM you do not need a VCS. 

I have been doing that over a SIP trunk for the past 15 months or so. 

If you want to bridge video then a VCS or other video infrastructure would come into play.