06-12-2016 02:37 PM
Hi All,
The ip phones at my company have most of the settings items in our 7942 phones greyed out...so we are not able to verify phone settings, like network settings and ring tones. Do you know where I need to go in call manager to ensure these settings are accessible?
Thanks!
Josh
Solved! Go to Solution.
06-13-2016 06:40 AM
Hi,
Please make sure the phone settings are enabled on the CUCM's config page for these phones, also please notice that if you want to change the values you need to press **# .
HTH
Regards,
Christian.
06-13-2016 06:40 AM
Hi,
Please make sure the phone settings are enabled on the CUCM's config page for these phones, also please notice that if you want to change the values you need to press **# .
HTH
Regards,
Christian.
06-13-2016 08:31 AM
Thanks Christian! I didnt see that setting at first, I now have full access to the phone settings. I also found the follwoing link that might help others too:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide