01-03-2012 12:42 PM - edited 03-19-2019 04:11 AM
Dears,
I have 3 Cisco CallManager clusters with 6 MCS-7825-H3 servers, I just want to buy another server as spear part in case any server crash.
But I found in HP only one server DL320-G6 (which is obsolete).
Can anyone confirm is that server will work with CCM 4.3 or not, I didn't find it in data sheet:
Thanks for advice.
Solved! Go to Solution.
01-03-2012 01:18 PM
Tamer,
Looks are G5s are the latest CUCM 4.3 supported, G6 will most likely fail hardware compatibility check and not install.
Chris
01-03-2012 01:18 PM
Tamer,
Looks are G5s are the latest CUCM 4.3 supported, G6 will most likely fail hardware compatibility check and not install.
Chris
01-03-2012 01:51 PM
Thanks Chris, I found that in Cisco documents.
But what do you think if we removed both hard disks from old MCS-7825-H3 server and plug them in DL320-G6...
That can work?
01-03-2012 01:59 PM
Good question, technically it should, the only issue I see is if you tried to patch it, but since there is not more patches being delivered for Windows based CUCM you should not need to worry about that.
Chris
01-03-2012 02:19 PM
Actually I should buy this server DL320-G6 for thousands of dollars, so I'm discussing here this point to not go for buying such server and become not supported and I don't use it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide