06-25-2012 08:47 AM - edited 03-19-2019 05:09 AM
I am trying to get click to call working from Microsoft Word/Excel with Jabber for Windows and having a hard time. It was working with the CUPC client, but not since chaning client to Jabber. I have played around with the smart tags in Office/Excel and cannot get it to work.
CUCM version 8.6.2
CUPS version 8.6.3
Jabber for Windows version 9.0.1
Thanks
Solved! Go to Solution.
06-26-2012 07:18 AM
Hi Michael,
I did find this recent thread;
https://supportforums.cisco.com/message/3635109#3635109
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen
06-25-2012 11:15 AM
Hi Michael,
There is an actual Jabber Sub-community here
https://supportforums.cisco.com/community/netpro/collaboration-voice-video/jabber
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen
06-25-2012 01:13 PM
Thanks Rob, I did find the jabber sub community and did not find anything that matched the issue we are having. I will keep looking around.
06-25-2012 08:14 PM
Hi
Till Now This feature is not present in Jabber.
Regards
Ronak Patel
Rate helpful posts by clicking stras below the answer.
06-26-2012 04:28 AM
Ronak,
By "Til now" do you mean this is not possible, or it is now possible? The CUPC client had a snap-in to Microsoft Office applications and the click to call option was available so I would be surprised if that feature is not available with Jabber.
06-26-2012 07:18 AM
Hi Michael,
I did find this recent thread;
https://supportforums.cisco.com/message/3635109#3635109
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen
06-26-2012 11:56 AM
Thanks Rob,
I saw that one but thought the post date was 2007 so was looking for more recent information. The post was entered this past May so hopefully with newer revisions set to come out, this feature will be added. It's too bad as CUPC could do the click to call.
06-27-2012 08:07 PM
I was at the Jabber road show today and verified that click to call is only supported in Outlook and Sharepoint currently, but it is on the roadmap.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide