04-16-2013 09:21 AM - edited 03-19-2019 06:36 AM
Hello.
I´m trying to upgrade CUCM 7.1.5 to CUCM 8.6 into MCS 7825I4.
According the compatibility matrix i need to add 2 MB of RAM more.
MCS 7825 | 2GB For version 8.0(3) or higher, 4 GB strongly recommended, required for 8.6(1)+ |
My question is, if i buy this memory ram and put into the MCS, the server is supported or loose the guarantee?
Thank you.
Solved! Go to Solution.
04-16-2013 09:34 AM
It's still supported. Technically you're supposed to buy the official Cisco part number from a Cisco reseller, but since those servers are end-of-life, I'm not sure you can still do that. The part number was MEM-7825-I4-2GB=. You can probably look for that on the secondary market, or check with your reseller.
04-16-2013 09:34 AM
It's still supported. Technically you're supposed to buy the official Cisco part number from a Cisco reseller, but since those servers are end-of-life, I'm not sure you can still do that. The part number was MEM-7825-I4-2GB=. You can probably look for that on the secondary market, or check with your reseller.
04-16-2013 11:34 AM
Thank you for the reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide