12-20-2015 09:06 AM - edited 03-19-2019 10:30 AM
Dear support community,
We have decided to close down our phones not only during the night, but also during lunch-time.
That means I should be able to config two night-service times a day, so in the end, the line is open from 07.30 to 12.00 and 13.15 to 18.30. But as far as I can understand the command night-service from CME its not possible...
Any help is welcome.
Cheers
Daniel
12-20-2015 06:03 PM
Hi Daniel,
Please configure the night-service weekday command as explained in the following link
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/command/reference/cme_cr/cme_n1ht.html#wp1574371398
Manish
- Do rate helpful posts -
12-21-2015 06:45 AM
Dear Manish,
There is no entrty for twice a day. Is it possible to enter it twice such as:
night-service weekday 18:30 07:30
night-service weekday 12:00 13:15
Does this work?
Daniel
12-21-2015 07:57 PM
Hi Daniel,
It will not work, see what happens if i try to do the above on CME
3945-PDI(config-telephony)#night-service weekday 18:30 7:30
3945-PDI(config-telephony)#night-service weekday 12:00 13:15
Warning: overwrite the existing Mon config
Warning: overwrite the existing Tue config
Warning: overwrite the existing Wed config
Warning: overwrite the existing Thu config
Warning: overwrite the existing Fri config
Manish
- Do rate helpful posts -
12-21-2015 09:00 PM
Good Morning Manish,
I know, thats the reason why I posted my answer :).
Any ideas?
Daniel
12-22-2015 01:57 AM
Hi Daniel,
I don't see a way to accomplish your scenario, you may check with TAC if they have any recommendations or if there is a feature request for the same.
Manish
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide