Nortel 1120e with CUCM 9.1

[AliyevRas]

Hi everyone

I'm trying register Nortel 1120e SIP ip phone with Cisco Unified Communication Manager version 9.1. Did anyone have a success registration ? Or can anyone provide info about it, please ?
After firmware change to SIP the phone need some user for login . I configured user and third-party (basic) device , associated the user with phone , in Digest User added same user. Seems i did everything for third-party registration from CUCM side.
From 1120e I wrote domains name of my network ,added ip address of cucm with port 80 . Trying loggin and fail

[Manish Gogna]

Hi,

Please check the config as per the following doc

https://supportforums.cisco.com/document/50491/how-register-third-party-sip-phones-communications-manager

Manish

- Do rate helpful posts -

[AliyevRas]

Hi Manish Gogna

I read all steps. Nothing missed. On Nortel 1120e I must configure domain . I need provide domain name ip address and port. Which port I must put there ?
And after , phone requests ID and password . I think i did something wrong on ip phone . Just need I in  someone who has experience with registration 1120e nortel with CUCM

[AliyevRas]

I found the problem , it was on ip phone itself ) Thnak you very much