cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
718
Views
0
Helpful
6
Replies

NTP Settings

scooter817
Level 2
Level 2

Hi Everyone

I had an issue with a site that I have in Orange County California, the time on all the devices was ahead by 15mins.So I restarted the NTP service and it fixed the issue but when I use the Utils NTP Status command I see that it says that the service is unsynchronised and that the server is re-starting. Should I worry about this since my time is correct now or does it matter and I've attached a pic of the screen and thanks in advance and everyone have a great weekend.

Eric

1 Accepted Solution

Accepted Solutions

I did not understand what u are trying to say.

You need to get the NTP correct since I have seen issues where backup could not be taken due to this issue.

regds,

aman

View solution in original post

6 Replies 6

Aman Soi
VIP Alumni
VIP Alumni

the snapshot shows NTP is unsynchronised.

 

you need to get this rectified.

 

regds,

aman

Aman

Could the time potentially end up being off again, I thought that something was still wrong.

I did not understand what u are trying to say.

You need to get the NTP correct since I have seen issues where backup could not be taken due to this issue.

regds,

aman

Thanks Aman

I will open up a case with TAC and work on this beuase I don't want the backups to be effected.

Eric

Hi Eric,

 

there is nothing to panic.

 

This is the one issue which I faced so thought of sharing.

Do check the timings[router or switch /Linux server] on device where NTP is configured ?

 

regds,

aman

Thanks Aman