PCP 11.5 and 11.6 Getting Started Wizard - Unity 11.5 issue

[paulmh]

Hi,

Im doing a clean deployment of a BE6KS, fresh installs of:

CUCM 1: 11.5.1.11900-26

Unity: 11.5.1.11900-26

IMP: 11.5.1.11900-21

I've tried PCP 11.5 and 11.6 but i get the following when adding the devices in the getting started wizard:

The processor(s), <unity ip address> is already configured. The Getting Started Wizard is for fresh installs only. Please close the wizard and configure this processor from the Infrastructure Setup menu.

I've added the OS proxy user in CUC to allow PCP access to it.

any help would be appreciated

thanks

[michael mack]

Were you able to find anything out about this?  Same thing is happening to me.  Can't for the life of me figure out how to get past it.

[paulmh]

unfortunately no,

I've had to leave Unity out of the GSW and configure Unity, SIP trunks, VM Profile etc.. manually to get the system configured.