11-23-2010 09:22 PM - edited 03-19-2019 01:58 AM
Hi
When i try to make a call from personal Communicator, it shows "outgoing call failure (Phone out of service)".
I checked all the setting in callmanager and presence.After dialling callmanager reply with SIP: 400 bad request.
11-28-2010 01:35 AM
Hi Sajeel,
This looks like a configuration issue so to investigate it further you can check:
- detailed cucm traces
- sniffer trace between cupc and cucm so you can review the sip traffic
If you want to verify configuration first then I would:
1) try to make the same call from the ip phone of this user
2) check the partition/css settings on the soft phone (compare to the hard phone if that one works)
3) verify in the sip invite from the sniffer that the called party is correct (if not, check if application dial rules are affecting your dialing)
12-06-2010 03:56 AM
Hi Bvanturn
I checked my configurations again and again.No hard phone is associated with that Personal Communicator.When i call to personal Communicator device its successful.But when call from personal Comm to any number its failed.
In sniffer i got SIP message from Callmanager with this error "400 Bad Request".
When i associate hardphone with personal Communicator device and deskphone is selected then every outgoing & incoming call successfull.
Sometime when that personal comm device lregistered for long time it starts every outgoing call successful.But after register again same issue.
Can you send me any sample configuration for personal Communicator device in Callmager and Presence???
Thanks
Regards
Sajeel
06-04-2012 02:35 AM
Hello Experts
we are facing this issue again with another user. Can someone guide us in this issue.
Thanks in advance.
Sajeel Akram
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide