I've gone through and set up Prime so it's up and running. I have all of our video endpoints added (c40's,c20's,sx20's, etc), I've added our VCS, I've added everything except TMS. Whenever I try adding the TMS, Prime recognizes it as a CTMS and says authentication failed. It leaves it in an Inaccessible status. Here's what I've done:
* Verified TMS has http access.
* Verified the SNMP is correct (it's the same for the endpoints).
* Deleted/recreated the credentials entry within Manage Credentials.
* reentered the password for http access both in AD and Prime.
* Verified http access on the TMS.
* Deleted/rediscovered the TMS.
* Rebooted the server.
* Upgraded to Prime 9.5
* Modified credentials for the TMS entry within Prime.
* Had someone else look at it to make sure I wasn't missing anything.
At this point, it still reads it as a CTMS and fails to authenticate against it. Any ideas?
Thank you,
Matt
