01-31-2012 05:40 PM - edited 03-19-2019 04:19 AM
I have that ...
hostname CME_B
!
boot-start-marker
boot system flash:c2801-ipvoicek9-mz.151-4.M2.bin
boot-end-marker
!
no aaa new-model
network-clock-participate wic 3
network-clock-select 1 E1 0/3/0
dot11 syslog
ip source-route
no ip dhcp use vrf connected
!
ip dhcp pool HTC-VOICE
network 192.168.2.0 255.255.255.0
default-router 192.168.2.1
option 150 ip 192.168.2.1
dns-server
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
!
controller E1 0/3/0
framing NO-CRC4
ds0-group 0 timeslots 1-8 type r2-digital r2-compelled
cas-custom 0
country bolivia use-defaults
description TUNEL HACIA EL CME A
!
!
voice-port 0/3/0:0
cptone ES
!
!
!
mgcp profile default
!
!
dial-peer voice 10 pots
destination-pattern 5..
no digit-strip
direct-inward-dial
port 0/3/0:0
forward-digits all
!
!
ephone-dn 1 dual-line
number 601
description LOPEZ,Victor_
name LOPEZ,Victor
call-forward busy 601
call-forward noan 601 timeout 10
!
!
ephone 1
mac-address 0014.1C2E.4369
keepalive 200
type 7940
keep-conference
button 1:1
!
CME_A>en
CME_A#sh run
Building configuration...
Current configuration : 5968 bytes
!
! Last configuration change at 01:12:20 UTC Wed Feb 1 2012
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname CME_A
!
boot-start-marker
boot system flash:c2801-ipvoicek9-mz.151-4.M2.bin
boot-end-marker
!
!
!
no aaa new-model
network-clock-participate wic 3
dot11 syslog
ip source-route
!
!
!
no ip dhcp use vrf connected
!
ip dhcp pool HTC-VOICE
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
option 150 ip 192.168.1.1
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
!
controller E1 0/3/0
framing NO-CRC4
clock source internal
ds0-group 1 timeslots 1-8 type r2-digital r2-compelled
cas-custom 1
country bolivia use-defaults
!
!
voice-port 0/3/0:1
cptone ES
!
!
!
mgcp profile default
!
dial-peer voice 11 pots
destination-pattern 6..
no digit-strip
direct-inward-dial
port 0/3/0:1
forward-digits all
!
ephone-dn 1 dual-line
number 501
description Vita_Eyzaguirre
name Vita_Eyzaguirre
call-forward busy 501
call-forward noan 501 timeout 10
!
!
ephone 1
description Vita_Eyzaguirre
mac-address 000D.BD12.6E77
keepalive 200
button 1:1
!
That is the debug ok
CME_A#
Sub Calling(TON=Unknown, NPI=Unknown, Data=S\, Length=104)
Sub Called(TON=Abbreviated, NPI=Unknown, Data=e h\U, Length=3)
It's normal that ??
cmeA (2801) ===== e1========e1 ========cme B (2801)
01-31-2012 07:36 PM
I am not 100% sure what you are asking here but if you are asking if its possible to connect to two routers back to back using E1, then yes its possible. One router should be the network side and the other should be set as user side and you should be good to go.
02-01-2012 04:11 AM
Why do you want to connect two CMEs with E1 instead of IP ?
02-06-2012 11:34 AM
Well, I'm trying to make this demo to enterprise, so Does it correct my configuration? because I do a call to other point and I see that debug in console:
Sub Calling(TON=Unknown, NPI=Unknown, Data=S\, Length=104)
Sub Called(TON=Abbreviated, NPI=Unknown, Data=e h\U, Length=3)
Is it normal??
Thank you for your interest
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide