router was not booting from flash

[PRAVEEN KUMAR GVK]

hi

my 2811 router was not able to from flash

while it booting it was showing below message. please find the image.

after this using tftp i was uploaded the ios after uploading it was booting sucessfully. after booting when i reload the router

the above message was showing. then i have to reload the ios. config reg is 0x2102, ios is c2800nm-adventerprisek9-mz.124-24.T.bin
and 15T. bot the ios. on this i have to configure mgcp for fxs ports.

please help me.

thankq.

[Leo Laohoo]

Remove all the network modules and/or HWIC from the router and reboot again.

Can you please cut-and-paste the entire bootup process (please don't post a photo taken from your mobile phone because  you might miss out some important details).