01-08-2011 01:06 AM
hi want to know that how i can associate a bell with ip phone, whenever i click the bell in response to that my ip phone should ring is it possible, if possible please give me the answer thank you.
01-08-2011 08:13 AM
Hi,
I'm not sure what you mean by 'click a bell' I guess you want to use some sort of intercom fetaure just like those used to open a door, basically the guess gets to the door, press a button and the phone rings, then the attendant may open the door by pressing a button or code on the phone, if that is the case then take a look on this doc:
https://supportforums.cisco.com/docs/DOC-9571/
There are other vendors that have similar devices such as Viking electronics or Valcom.
If this is not your exact scenario then what I can tell you is that if that "Bell" has an analog interface (FXS/FXO) then you can connect that to an analog interface on your system, those kind of devices works like an analog phone so you just need to program it and configure CME/CUCM for a PLAR.
If this helps please rate.
Christian Nuche.
PDI HD Team.
07-20-2011 07:10 PM
Does this mean that an analog device like a door lock could be used also? The lock needs a short application of current to open the latch
07-21-2011 07:18 AM
You want to look at something like this to control the door lock
http://www.valcom.com/pdf/v-2901a.pdf
Srini
07-21-2011 06:26 PM
thank you. i'll take a look at it
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide