04-28-2015 01:27 AM - edited 03-19-2019 09:31 AM
Dear All,
I've created SIP Trunk between CUCM 10.5 and Siemens HiPath 4000.
When I'm dialing from Siemens Ip Phone ( ext. 2200) it shows 2305 .
But when I'm calling from Cisco Ip phone (ext. 2305) it shows me +2200
How can I strip this + sign CUCM?
Thanks in advance
Bahlul
04-28-2015 02:28 AM
Hi Bahlul,
Do you see the + prefix on any other calls made by Cisco Phones as well?
Can you share the screenshots of the Route pattern and RL that is pointing towards Siemens HiPath from CUCM?
Manish
04-28-2015 02:35 AM
Hello Manish,
When I'm making PSTN calls, there is no + sign.
The + sign show only with internal calls.
Thanks in advance
Bahlul
04-28-2015 02:54 AM
Are the calls using and translation pattern or any calling party transformation? The + has to be defined somewhere for it to be prefixed to the caller id.
Manish
04-28-2015 02:58 AM
Dear Manish,
There is no dial-plan configuration, I just fresh installed CUCM, and created simple route pattern. (2XXX)
Thanks in advance
Bahlul
04-28-2015 03:02 AM
Please share the Route Plan report and screenshot of DN 2200 and the Route pattern 2XXX.
Manish
04-28-2015 02:59 AM
Dear Manish,
There is no dial-plan configuration, I just fresh installed CUCM, and created simple route pattern. (2XXX)
Thanks in advance
Bahlul
04-28-2015 03:03 AM
Dear Manish,
There is no dial-plan configuration, I just fresh installed CUCM, and created simple route pattern. (2XXX)
Thanks in advance
Bahlul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide