Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
619
Views
0
Helpful
3
Replies

spa5xxG phones and cucm 8.x

Go to solution
Roger_Nakoiri
Level 1
Level 1

‎03-19-2012 01:33 AM - edited ‎03-19-2019 04:36 AM

Someone can help me. It is possible to register cisco spa5xxG phones in CUCM 8.X? If yes, what is requirements and process

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
ronpatel
Level 8
Level 8

‎03-19-2012 01:40 AM

HI

SPA supports Session Initiation Protocol (SIP) and Smart Phone Control Protocol (SPCP). Natively CUCm do not support SPA phone. You can add them as third party SIp phones only in CUCM.

Regards

Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

View solution in original post

0 Helpful
3 Replies 3

Go to solution
ronpatel
Level 8
Level 8

‎03-19-2012 01:40 AM

HI

SPA supports Session Initiation Protocol (SIP) and Smart Phone Control Protocol (SPCP). Natively CUCm do not support SPA phone. You can add them as third party SIp phones only in CUCM.

Regards

Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
0 Helpful

Go to solution
Roger_Nakoiri
Level 1
Level 1
In response to ronpatel

‎03-19-2012 03:00 AM

Thanks Ronack for your feedback. It is my first experience in CuCm. Can you indique me the process to add them as 3rd party sip phones?

Thx !

0 Helpful

Go to solution
ronpatel
Level 8
Level 8
In response to Roger_Nakoiri

‎03-19-2012 03:06 AM

HI

Very simple procedure to configure 3rd party sip phones.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmcfg/b09sip3p.html

Please rate Helpful posts.

Regards

Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
0 Helpful
Customers Also Viewed These Support Documents