05-21-2012 10:29 PM - edited 03-19-2019 04:57 AM
Hi,
I am having Cisco 3945 router and is having image "c3900-universalk9-mz.SPA.150-1.M1.bin" , and now want to check if SRST can be enabled on the same or not.
I have checked it with command output "show callmanager fallback" and "show call-manager fallback all", attaching the output of the same. Please confirm id SRST already configured on it or not?
And if not configured how to configure it.
05-22-2012 07:06 AM
Yes, looks like it is somewhat configured, can you please provide "sh run"?
Also, dont forget that you need to configure SRST in CUCM as well with SRST reference and assign it to device pool(s).
HTH,
Chris
05-22-2012 08:37 AM
05-22-2012 08:45 AM
It is configured. Is something not working?
Chris
05-22-2012 08:51 AM
Customer has configured it , please confirm is it correct configuration? Customer was not confident enough on this.
customer has not checked it's working, as he has not implemented it on CUCM.
05-22-2012 10:41 AM
Yes it should work for SCCP phones. But you need to always test SRST to be certain.
HTH, please rate all useful posts!
Chris
05-24-2012 10:39 PM
Hi Chris,
Thank you for your reply. I have one more query on this.
After creating new Device Pool for SRST, we need to move remote Ip phones from their original Device Pool and map them into newly created Device pool. So in the scenario of calls working through WAN link,will those phones work? as we have removed them from their original Device Pool.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide