Unity Auto Shutdown (EAAS) initiated due to thermal reason

[yewting]

Hi,

The Unity Server auto shutdown due the the following reason:

Event Type: Error

Event Source: cpqasm2

Event Category: None

Event ID: 4111

Date: 1/18/2005

Time: 11:55:16 PM

User: N/A

Computer: UNITY1

Description:

Environment Abnormality Auto Shutdown (EAAS) initiated due to thermal reasons, either resulting from the system overheating, or from the loss of cooling.

Data:

0000: 00 00 00 00 01 00 58 00 ......X.

0008: 00 00 00 00 0f 10 35 c4 ......5Ä

0010: 00 00 00 00 00 00 00 00 ........

0018: 00 00 00 00 00 00 00 00 ........

0020: 00 00 00 00 00 00 00 00 ........

Which part of the server hardware should I check? Need help here. Pls advise. Thank you very much.

[kechambe]

It's like that there is a probably with one of the fans but I can't say for sure. If the server is Cisco branded hardware and you have a contact on the hardware you can open a case with TAC and they can get HP involved. Otherwise it would be best to contact HP or whoever supports your server hardware directly.

Thanks,

Keith

[yewting]

Hi Keith,

Thank you for the prompt reply. The server is Cisco MCS 7845. I'll open the TAC case for hardware replacement.